- Other Energy Related Products[3]
- Other Environmental Products[2]
- Other Recycling Products[5]
- Waste Management[10]
- Drying Equipment[1]
- Other Machinery[1]
- Other Plastic Processing Machinery[3]
- Plastic Drying Machinery[1]
- Plastic Recycling Machinery[7]
- Rubber Processing Machinery[10]
- Rubber Product Making Machinery[3]
- Recycled Plastic[10]
- Recycled Rubber[1]
- Other Security & Protection Products[2]
- Security Services[1]
Vacuum Distillation Device
1.Rapid and applied feeding and tapping system
2.high output rate
3.material boiler steel
4.with green star &CE&ISO9001-2008
1. Each set of unit is comprised of the following eight parts:
a. Reboiler
b. Fractionating tower
c. Pressure release device
d. Central electric control system
e. Condensation system
f. Fuel gas heating system (exhaust treatment system)
g. Air heater
h. Flue dust collecting system
2. Domestic initiation:
a. Manufacturing the whole set of device should be carried out in an environment of no smoking and no smell, thus the device having excellent safety and environmental protection property.
b. The pressure release device operates through water circulation, which greatly improves the security of the system.
c. The release of pressure during the production dramatically increases the output within certain time and meanwhile improves the quality of oil.
d. The heating system adopts hot air heating technology, which improves the safety performance of production and heating efficiency.
e. High efficiency fuel gas heating system. When the heated gas reaches 150°C during refining, a large amount of gas will be generated: through methane to butane, which cannot be liquefied under normal temperature. A large quantity of energy will be generated after these gases fully burn within a specially designed gas burner. Then energy will be saved greatly.
f. Flue dust collecting system; Equipped with water hammer cyclone dust collecting room, which makes sure the discharged flue gas reach national emission standard.
1 | Equipment type | JL-1 type | JL-2 type | JL-3 | JL-4 | Jl-5 |
2 | Raw material | Raw oil Waste engine oil Waste plastic oil Waste rubber oil | Raw oil Waste engine oil Waste plastic oil Waste rubber oil | Raw oil Waste engine oil Waste plastic oil Waste rubber oil |
Raw oil Waste engine oil Waste plastic oil Waste rubber oil | Raw oil Waste engine oil Waste plastic oil Waste rubber oil |
3 | Structural form | Vertical band tower | Vertical band tower | Horizontal band tower | Tubular heat | Tubular heat |
4 | 24-hour disposal amount (no less than) | 6 tons raw material | 10 tons raw material | 25 tons raw material | 50 tons raw material | 100 tons raw material |
5 | Working form | Intermittent operation | Intermittent operation | intermittent operation | Continuous operation | Continuous operation |
6 | Operating pressure | Normal/ Negative pressure | Normal /Negative pressure | normal pressure | normal pressure | normal pressure |
7 | Oil yield (No less than) | 70%-80% | 70%-80% | 70%-80% | 65%-75%- | 65%-75% |
8 | Power | 20.0kw | 20.0kw | 20.0kw | 40.0kw | 120.0kw |
9 | Mode of cooling | Water cooling | Water cooling | Water cooling | Waste cooling | Water cooling |
10 | Consumption of cooling water (T/h) | 9 | 9 | 18 | 40 | 100 |
11 | Heating mode | Hot air | Hot air | Hot air | Tubular heat | Tubular heat |
12 | Mounting means | Having base | Having base | Having base | Having base | Having base |
13 | Noise dB(A) | ≤85 | ≤85 | ≤85 | ≤85 | ≤85 |
14 | Production period | 20 days | 20 days | 40 days | 60days | 60 days |